15TR Round shape cooling tower

FRP Round shape cooling dubai

We leading manufacturers and exports of 15TR FRP Round shape Cooling tower with PVC Fills, Fan Motor manufacturer in Nigeria to below countries
Cooling tower manufacturer and supplier of in Bangladesh,
FRP Cooling tower in Djibouti,
Fiber plastic Cooling tower in United Arab Emirates,
GRP Cooling tower in Kenya,
FRP Cooling tower in Kuwait,
FRP Cooling tower in Zimbabwe,
FRP Cooling tower Malaysia,
Cooling tower manufacturer in Nigeria,
Cooling tower manufacturer in Tanzania,
Cooling tower manufacturer in Oman,
Cooling tower manufacturer in Togo,
Cooling tower manufacturer in Zambia,
Cooling tower manufacturer in Mozambique,
Cooling tower manufacturer in Uganda,
Cooling tower manufacturer in Myanmar,
Cooling tower manufacturer in Nigeria

50TR Cooling tower size: 960 x 2000MM (D x H) with 0.5HP, 960RPM Cooling tower Motor

Discription: MAKE:WELLTECH
Design,Engineering,Manufacturing,Supply, for MODEL WB-CZ152 -C1 FRP Cooling tower Round type with honey comb PVC fills, Water distribution arrangement with Aluminium sprinkler, Statically and dynamically balanced axial flow fan, TEFC motor, Make up and quick fill arrangement, over flow and drain connections with water holding basin. Suitable for flow rate 150L/min, 45000KCAL/H

Data For Optimal Selection
Rate of Water Circulation (LPM)
Water Inlet Temperature (ºC)
Water Outlet Temperature (ºC)
Ambient wet Bulb temperature (ºC)
Also Information in brief site conditions and Water Quality

The FRP Bottle Shape and Square shape Cooling Towers (Fiber glass Reinforced Plastic) also called as induced draft cooling tower. The casing and basins are designed to withstand severe vibration, high wind load and to resist corrosion. The Cooling Tower consists of Honey comb PVC fills and eliminators in a design that maximizes economy and efficiency and directly driven fan and Motor ‘Minimum drift Losses’. Uniform distribution of hot water by rotating arm sprinkler. Hot dipped Galvanized hardware to withstand wind forces. The bottle shape makes possible to provide maximum cooling efficiency in minimum plan area with lower energy consumption.

100TR FRP Round shape Cooling tower with PVC Fills, Fan Motor manufacturer in Oman

00TR welltech brand cooling tower

We leading manufacturers and exports of 100TR FRP Round shape Cooling tower with PVC Fills, Fan Motor manufacturer in Nigeria to below countries
Cooling tower manufacturer and supplier of in Bangladesh,
FRP Cooling tower in Djibouti,
Fiber plastic Cooling tower in United Arab Emirates,
GRP Cooling tower in Kenya,
FRP Cooling tower in Kuwait,
FRP Cooling tower in Zimbabwe,
FRP Cooling tower Malaysia,
Cooling tower manufacturer in Nigeria,
Cooling tower manufacturer in Tanzania,
Cooling tower manufacturer in Oman,
Cooling tower manufacturer in Togo,
Cooling tower manufacturer in Zambia,
Cooling tower manufacturer in Mozambique,
Cooling tower manufacturer in Uganda,
Cooling tower manufacturer in Myanmar,
Cooling tower manufacturer in Nigeria

50TR Cooling tower size: 2895 x 3050MM (D x H) with 5HP, 960RPM Cooling tower Motor

Discription: MAKE:WELLTECH
Design,Engineering,Manufacturing,Supply, for MODEL WB-CZ100 -C1 FRP Cooling tower Round type with honey comb PVC fills, Water distribution arrangement with Aluminium sprinkler, Statically and dynamically balanced axial flow fan, TEFC motor, Make up and quick fill arrangement, over flow and drain connections with water holding basin. Suitable for flow rate 1000L/min, 300000KCAL/H

Data For Optimal Selection
Rate of Water Circulation (LPM)
Water Inlet Temperature (ºC)
Water Outlet Temperature (ºC)
Ambient wet Bulb temperature (ºC)
Also Information in brief site conditions and Water Quality

The FRP Bottle Shape and Square shape Cooling Towers (Fiber glass Reinforced Plastic) also called as induced draft cooling tower. The casing and basins are designed to withstand severe vibration, high wind load and to resist corrosion. The Cooling Tower consists of Honey comb PVC fills and eliminators in a design that maximizes economy and efficiency and directly driven fan and Motor ‘Minimum drift Losses’. Uniform distribution of hot water by rotating arm sprinkler. Hot dipped Galvanized hardware to withstand wind forces. The bottle shape makes possible to provide maximum cooling efficiency in minimum plan area with lower energy consumption.

80TR FRP Round shape Cooling tower with PVC Fills, Fan Motor manufacturer in Tanzania

80tr FRP Rectangular shape cooling tower

We leading manufacturers and exports of 80TR FRP Round shape Cooling tower with PVC Fills, Fan Motor manufacturer in Nigeria to below countries
Cooling tower manufacturer and supplier of in Bangladesh,
FRP Cooling tower in Djibouti,
Fiber plastic Cooling tower in United Arab Emirates,
GRP Cooling tower in Kenya,
FRP Cooling tower in Kuwait,
FRP Cooling tower in Zimbabwe,
FRP Cooling tower Malaysia,
Cooling tower manufacturer in Nigeria,
Cooling tower manufacturer in Tanzania,
Cooling tower manufacturer in Oman,
Cooling tower manufacturer in Togo,
Cooling tower manufacturer in Zambia,
Cooling tower manufacturer in Mozambique,
Cooling tower manufacturer in Uganda,
Cooling tower manufacturer in Myanmar,
Cooling tower manufacturer in Nigeria

50TR Cooling tower size: 1920 x 2720MM (D x H) with 2HP, 960RPM Cooling tower Motor

Discription: MAKE:WELLTECH
Design,Engineering,Manufacturing,Supply, for MODEL WCS-CO230 FRP Cooling tower Round type with honey comb PVC fills, Water distribution arrangement with Aluminium sprinkler, Statically and dynamically balanced axial flow fan, TEFC motor, Make up and quick fill arrangement, over flow and drain connections with water holding basin. Suitable for flow rate 600L/min, 180000KCAL/H

Data For Optimal Selection
Rate of Water Circulation (LPM)
Water Inlet Temperature (ºC)
Water Outlet Temperature (ºC)
Ambient wet Bulb temperature (ºC)
Also Information in brief site conditions and Water Quality

The FRP Bottle Shape and Square shape Cooling Towers (Fiber glass Reinforced Plastic) also called as induced draft cooling tower. The casing and basins are designed to withstand severe vibration, high wind load and to resist corrosion. The Cooling Tower consists of Honey comb PVC fills and eliminators in a design that maximizes economy and efficiency and directly driven fan and Motor ‘Minimum drift Losses’. Uniform distribution of hot water by rotating arm sprinkler. Hot dipped Galvanized hardware to withstand wind forces. The bottle shape makes possible to provide maximum cooling efficiency in minimum plan area with lower energy consumption.

60TR FRP Round shape Cooling tower with PVC Fills, Fan Motor manufacturer in Nigeria

50Tr Cooling tower welltech

We leading manufacturers and exports of 60TR FRP Round shape Cooling tower with PVC Fills, Fan Motor manufacturer in Nigeria to below countries
Cooling tower manufacturer and supplier of in Bangladesh,
FRP Cooling tower in Djibouti,
Fiber plastic Cooling tower in United Arab Emirates,
GRP Cooling tower in Kenya,
FRP Cooling tower in Kuwait,
FRP Cooling tower in Zimbabwe,
FRP Cooling tower Malaysia,
Cooling tower manufacturer in Nigeria,
Cooling tower manufacturer in Tanzania,
Cooling tower manufacturer in Oman,
Cooling tower manufacturer in Togo,
Cooling tower manufacturer in Zambia,
Cooling tower manufacturer in Mozambique,
Cooling tower manufacturer in Uganda,
Cooling tower manufacturer in Myanmar,
Cooling tower manufacturer in Nigeria

50TR Cooling tower size: 1920 x 2720MM (D x H) with 2HP, 960RPM Cooling tower Motor

Discription: MAKE:WELLTECH
Design,Engineering,Manufacturing,Supply, for MODEL WCS-CO230 FRP Cooling tower Round type with honey comb PVC fills, Water distribution arrangement with Aluminium sprinkler, Statically and dynamically balanced axial flow fan, TEFC motor, Make up and quick fill arrangement, over flow and drain connections with water holding basin. Suitable for flow rate 600L/min, 180000KCAL/H

Data For Optimal Selection
Rate of Water Circulation (LPM)
Water Inlet Temperature (ºC)
Water Outlet Temperature (ºC)
Ambient wet Bulb temperature (ºC)
Also Information in brief site conditions and Water Quality

The FRP Bottle Shape and Square shape Cooling Towers (Fiber glass Reinforced Plastic) also called as induced draft cooling tower. The casing and basins are designed to withstand severe vibration, high wind load and to resist corrosion. The Cooling Tower consists of Honey comb PVC fills and eliminators in a design that maximizes economy and efficiency and directly driven fan and Motor ‘Minimum drift Losses’. Uniform distribution of hot water by rotating arm sprinkler. Hot dipped Galvanized hardware to withstand wind forces. The bottle shape makes possible to provide maximum cooling efficiency in minimum plan area with lower energy consumption.

50TR FRP Round shape Cooling tower in Oman, Muscat, UAE

50TR Round shape cooling tower

We leading manufacturers and exports of 50TR FRP Round shape Cooling tower for Ice Cream Making Unit with PVC Fills to below countries
Cooling tower manufacturer and supplier of in Bangladesh,
FRP Cooling tower in Djibouti,
Fiber plastic Cooling tower in United Arab Emirates,
GRP Cooling tower in Kenya,
FRP Cooling tower in Kuwait,
FRP Cooling tower in Zimbabwe,
FRP Cooling tower Malaysia,
Cooling tower manufacturer in Nigeria,
Cooling tower manufacturer in Tanzania,
Cooling tower manufacturer in Oman,
Cooling tower manufacturer in Togo,
Cooling tower manufacturer in Zambia,
Cooling tower manufacturer in Mozambique,
Cooling tower manufacturer in Uganda,
Cooling tower manufacturer in Myanmar,
Cooling tower manufacturer in Nigeria

50TR Cooling tower size: 1990 x 2100MM (D x H) with 2HP, 960RPM Cooling tower Motor

Discription: MAKE:WELLTECH
Design,Engineering,Manufacturing,Supply, for MODEL WCS-CO230 FRP Cooling tower Round type with honey comb PVC fills, Water distribution arrangement with Aluminium sprinkler, Statically and dynamically balanced axial flow fan, TEFC motor, Make up and quick fill arrangement, over flow and drain connections with water holding basin. Suitable for flow rate 300L/min, 90,000KCAL/H

Data For Optimal Selection
Rate of Water Circulation (LPM)
Water Inlet Temperature (ºC)
Water Outlet Temperature (ºC)
Ambient wet Bulb temperature (ºC)
Also Information in brief site conditions and Water Quality

The FRP Bottle Shape and Square shape Cooling Towers (Fiber glass Reinforced Plastic) also called as induced draft cooling tower. The casing and basins are designed to withstand severe vibration, high wind load and to resist corrosion. The Cooling Tower consists of Honey comb PVC fills and eliminators in a design that maximizes economy and efficiency and directly driven fan and Motor ‘Minimum drift Losses’. Uniform distribution of hot water by rotating arm sprinkler. Hot dipped Galvanized hardware to withstand wind forces. The bottle shape makes possible to provide maximum cooling efficiency in minimum plan area with lower energy consumption.

40TR FRP Cooling tower for Milk powder making plant in Theni,Tamil nadu

40tr cooling tower dubai

We leading manufacturers and exports of 40TR FRP Round shape Cooling tower for Ice Cream Making Unit with PVC Fills to below countries
Cooling tower manufacturer and supplier of in Bangladesh,
FRP Cooling tower in Djibouti,
Fiber plastic Cooling tower in United Arab Emirates,
GRP Cooling tower in Kenya,
FRP Cooling tower in Kuwait,
FRP Cooling tower in Zimbabwe,
FRP Cooling tower Malaysia,
Cooling tower manufacturer in Nigeria,
Cooling tower manufacturer in Tanzania,
Cooling tower manufacturer in Oman,
Cooling tower manufacturer in Togo,
Cooling tower manufacturer in Zambia,
Cooling tower manufacturer in Mozambique,
Cooling tower manufacturer in Uganda,
Cooling tower manufacturer in Myanmar,
Cooling tower manufacturer in Nigeria

40TR Cooling tower size: 1780 x 1950MM (D x H) with 1HP Motor

Discription: MAKE:WELLTECH
Design,Engineering,Manufacturing,Supply, for MODEL WCS-CO230 FRP Cooling tower Round type with honey comb PVC fills, Water distribution arrangement with Aluminium sprinkler, Statically and dynamically balanced axial flow fan, TEFC motor, Make up and quick fill arrangement, over flow and drain connections with water holding basin. Suitable for flow rate 300L/min, 90,000KCAL/H

Data For Optimal Selection
Rate of Water Circulation (LPM)
Water Inlet Temperature (ºC)
Water Outlet Temperature (ºC)
Ambient wet Bulb temperature (ºC)
Also Information in brief site conditions and Water Quality

The FRP Bottle Shape and Square shape Cooling Towers (Fiber glass Reinforced Plastic) also called as induced draft cooling tower. The casing and basins are designed to withstand severe vibration, high wind load and to resist corrosion. The Cooling Tower consists of Honey comb PVC fills and eliminators in a design that maximizes economy and efficiency and directly driven fan and Motor ‘Minimum drift Losses’. Uniform distribution of hot water by rotating arm sprinkler. Hot dipped Galvanized hardware to withstand wind forces. The bottle shape makes possible to provide maximum cooling efficiency in minimum plan area with lower energy consumption.

30TR FRP Round shape Cooling tower for Ice Cream Making Unit with PVC Fills

30TR Cooling tower FRP Cooling tower exporter

We leading manufacturers and exports of 30TR FRP Round shape Cooling tower for Ice Cream Making Unit with PVC Fills to below countries
Cooling tower manufacturer and supplier of in Bangladesh,
FRP Cooling tower in Djibouti,
Fiber plastic Cooling tower in United Arab Emirates,
GRP Cooling tower in Kenya,
FRP Cooling tower in Kuwait,
FRP Cooling tower in Zimbabwe,
FRP Cooling tower Malaysia,
Cooling tower manufacturer in Nigeria,
Cooling tower manufacturer in Tanzania,
Cooling tower manufacturer in Oman,
Cooling tower manufacturer in Togo,
Cooling tower manufacturer in Zambia,
Cooling tower manufacturer in Mozambique,
Cooling tower manufacturer in Uganda,
Cooling tower manufacturer in Myanmar,
Cooling tower manufacturer in Nigeria

30TR Cooling tower size: 1660 x 2000MM (D x H) with 1HP Motor

Discription: MAKE:WELLTECH
Design,Engineering,Manufacturing,Supply, for MODEL WCS-CO230 FRP Cooling tower Round type with honey comb PVC fills, Water distribution arrangement with Aluminium sprinkler, Statically and dynamically balanced axial flow fan, TEFC motor, Make up and quick fill arrangement, over flow and drain connections with water holding basin. Suitable for flow rate 300L/min, 90,000KCAL/H

Data For Optimal Selection
Rate of Water Circulation (LPM)
Water Inlet Temperature (ºC)
Water Outlet Temperature (ºC)
Ambient wet Bulb temperature (ºC)
Also Information in brief site conditions and Water Quality

The FRP Bottle Shape and Square shape Cooling Towers (Fiber glass Reinforced Plastic) also called as induced draft cooling tower. The casing and basins are designed to withstand severe vibration, high wind load and to resist corrosion. The Cooling Tower consists of Honey comb PVC fills and eliminators in a design that maximizes economy and efficiency and directly driven fan and Motor ‘Minimum drift Losses’. Uniform distribution of hot water by rotating arm sprinkler. Hot dipped Galvanized hardware to withstand wind forces. The bottle shape makes possible to provide maximum cooling efficiency in minimum plan area with lower energy consumption.

30TR FRP Round shape and square shape cooling tower with PVC Fills in Bangladesh, exporter

round shape cooling tower 30TR welltech

We leading manufacturers and exports of 30TR FRP Round shape and square shape cooling tower with PVC Fills to below countries
Bangladesh,
Djibouti,
United Arab Emirates,
Kenya,
Kuwait,
Zimbabwe,
Malaysia,
Nigeria,
Tanzania,
Oman,
Togo,
Zambia,
Mozambique,
Uganda,
Myanmar,
Nigeria

30TR Cooling tower size: 1660 x 2000MM (D x H) with 1HP Motor

Discription: MAKE:WELLTECH
Design,Engineering,Manufacturing,Supply, for MODEL WCS-CO230 FRP Cooling tower Round type with honey comb PVC fills, Water distribution arrangement with Aluminium sprinkler, Statically and dynamically balanced axial flow fan, TEFC motor, Make up and quick fill arrangement, over flow and drain connections with water holding basin. Suitable for flow rate 300L/min, 90,000KCAL/H

Data For Optimal Selection
Rate of Water Circulation (LPM)
Water Inlet Temperature (ºC)
Water Outlet Temperature (ºC)
Ambient wet Bulb temperature (ºC)
Also Information in brief site conditions and Water Quality

The FRP Bottle Shape and Square shape Cooling Towers (Fiber glass Reinforced Plastic) also called as induced draft cooling tower. The casing and basins are designed to withstand severe vibration, high wind load and to resist corrosion. The Cooling Tower consists of Honey comb PVC fills and eliminators in a design that maximizes economy and efficiency and directly driven fan and Motor ‘Minimum drift Losses’. Uniform distribution of hot water by rotating arm sprinkler. Hot dipped Galvanized hardware to withstand wind forces. The bottle shape makes possible to provide maximum cooling efficiency in minimum plan area with lower energy consumption.

30TR FRP Round shape and square shape cooling tower with PVC Fills in kenya exporter

FRP Cooling Tower Kenya

We leading manufacturers and exports of 30TR FRP Round shape and square shape cooling tower with PVC Fills to below countries
Bangladesh,
Djibouti,
United Arab Emirates,
Kenya,
Kuwait,
Zimbabwe,
Malaysia,
Nigeria,
Tanzania,
Oman,
Togo,
Zambia,
Mozambique,
Uganda,
Myanmar,
Nigeria

30TR Cooling tower size: 1660 x 2000MM (D x H) with 1HP Motor

Discription: MAKE:WELLTECH
Design,Engineering,Manufacturing,Supply, for MODEL WCS-CO230 FRP Cooling tower Round type with honey comb PVC fills, Water distribution arrangement with Aluminium sprinkler, Statically and dynamically balanced axial flow fan, TEFC motor, Make up and quick fill arrangement, over flow and drain connections with water holding basin. Suitable for flow rate 300L/min, 90,000KCAL/H

Data For Optimal Selection
Rate of Water Circulation (LPM)
Water Inlet Temperature (ºC)
Water Outlet Temperature (ºC)
Ambient wet Bulb temperature (ºC)
Also Information in brief site conditions and Water Quality

The FRP Bottle Shape and Square shape Cooling Towers (Fiber glass Reinforced Plastic) also called as induced draft cooling tower. The casing and basins are designed to withstand severe vibration, high wind load and to resist corrosion. The Cooling Tower consists of Honey comb PVC fills and eliminators in a design that maximizes economy and efficiency and directly driven fan and Motor ‘Minimum drift Losses’. Uniform distribution of hot water by rotating arm sprinkler. Hot dipped Galvanized hardware to withstand wind forces. The bottle shape makes possible to provide maximum cooling efficiency in minimum plan area with lower energy consumption.

PVC Fills For Cooling Tower Size 600X300X150 MM export UAE, United Arab Emirates

cooling tower PVC fills

we are engaged in offering a huge gamut of PVC Fills For Cooling Tower Size 600X300X150 MM export UAE, United Arab Emirates.Our standard fill is constructed of a honeycombed PVC film. This honeycomb construction ensures even water distribution and high-efficiency water to air heat transfer. The PVC fill shall withstand a maximum inlet water temperature of 55°C. We can supply HIPS and ABS fills for high-temperature application up to 100°C.

Features:

  • Excellent contact surface area
  • Finest edge folding designs
  • Supreme Finish