30TR cooling tower manufacturer in iraq export

30TR round shape cooling

We leading manufacturers and exports of 30TR FRP Round shape Cooling tower with PVC Fills, Fan Motor manufacturer in Nigeria to below countries
Cooling tower manufacturer and supplier of in Bangladesh,
FRP Cooling tower in Djibouti,
Fiber plastic Cooling tower in United Arab Emirates,
GRP Cooling tower in Kenya,
FRP Cooling tower in Kuwait,
FRP Cooling tower in Zimbabwe,
FRP Cooling tower Malaysia,
Cooling tower manufacturer in Nigeria,
Cooling tower manufacturer in Tanzania,
Cooling tower manufacturer in Oman,
Cooling tower manufacturer in Togo,
Cooling tower manufacturer in Zambia,
Cooling tower manufacturer in Mozambique,
Cooling tower manufacturer in Uganda,
Cooling tower manufacturer in Myanmar,
Cooling tower manufacturer in Nigeria

50TR Cooling tower size: 1300 x 2000MM (D x H) with 1HP, 960RPM Cooling tower Motor

Discription: MAKE:WELLTECH
Design,Engineering,Manufacturing,Supply, for MODEL WB-CZ152 -C1 FRP Cooling tower Round type with honey comb PVC fills, Water distribution arrangement with Aluminium sprinkler, Statically and dynamically balanced axial flow fan, TEFC motor, Make up and quick fill arrangement, over flow and drain connections with water holding basin. Suitable for flow rate 250L/min, 75000KCAL/H

Data For Optimal Selection
Rate of Water Circulation (LPM)
Water Inlet Temperature (ºC)
Water Outlet Temperature (ºC)
Ambient wet Bulb temperature (ºC)
Also Information in brief site conditions and Water Quality

The FRP Bottle Shape and Square shape Cooling Towers (Fiber glass Reinforced Plastic) also called as induced draft cooling tower. The casing and basins are designed to withstand severe vibration, high wind load and to resist corrosion. The Cooling Tower consists of Honey comb PVC fills and eliminators in a design that maximizes economy and efficiency and directly driven fan and Motor ‘Minimum drift Losses’. Uniform distribution of hot water by rotating arm sprinkler. Hot dipped Galvanized hardware to withstand wind forces. The bottle shape makes possible to provide maximum cooling efficiency in minimum plan area with lower energy consumption.

25TR FRP Cooling tower in HS CODE 84198940 Export in Kenya

Frp cooling tower kenya

We leading manufacturers and exports of 25TR FRP Round shape Cooling tower with PVC Fills, Fan Motor manufacturer in Nigeria to below countries
Cooling tower manufacturer and supplier of in Bangladesh,
FRP Cooling tower in Djibouti,
Fiber plastic Cooling tower in United Arab Emirates,
GRP Cooling tower in Kenya,
FRP Cooling tower in Kuwait,
FRP Cooling tower in Zimbabwe,
FRP Cooling tower Malaysia,
Cooling tower manufacturer in Nigeria,
Cooling tower manufacturer in Tanzania,
Cooling tower manufacturer in Oman,
Cooling tower manufacturer in Togo,
Cooling tower manufacturer in Zambia,
Cooling tower manufacturer in Mozambique,
Cooling tower manufacturer in Uganda,
Cooling tower manufacturer in Myanmar,
Cooling tower manufacturer in Nigeria

50TR Cooling tower size: 1300 x 2000MM (D x H) with 1HP, 960RPM Cooling tower Motor

Discription: MAKE:WELLTECH
Design,Engineering,Manufacturing,Supply, for MODEL WB-CZ152 -C1 FRP Cooling tower Round type with honey comb PVC fills, Water distribution arrangement with Aluminium sprinkler, Statically and dynamically balanced axial flow fan, TEFC motor, Make up and quick fill arrangement, over flow and drain connections with water holding basin. Suitable for flow rate 250L/min, 75000KCAL/H

Data For Optimal Selection
Rate of Water Circulation (LPM)
Water Inlet Temperature (ºC)
Water Outlet Temperature (ºC)
Ambient wet Bulb temperature (ºC)
Also Information in brief site conditions and Water Quality

The FRP Bottle Shape and Square shape Cooling Towers (Fiber glass Reinforced Plastic) also called as induced draft cooling tower. The casing and basins are designed to withstand severe vibration, high wind load and to resist corrosion. The Cooling Tower consists of Honey comb PVC fills and eliminators in a design that maximizes economy and efficiency and directly driven fan and Motor ‘Minimum drift Losses’. Uniform distribution of hot water by rotating arm sprinkler. Hot dipped Galvanized hardware to withstand wind forces. The bottle shape makes possible to provide maximum cooling efficiency in minimum plan area with lower energy consumption.

15TR Round shape cooling tower

FRP Round shape cooling dubai

We leading manufacturers and exports of 15TR FRP Round shape Cooling tower with PVC Fills, Fan Motor manufacturer in Nigeria to below countries
Cooling tower manufacturer and supplier of in Bangladesh,
FRP Cooling tower in Djibouti,
Fiber plastic Cooling tower in United Arab Emirates,
GRP Cooling tower in Kenya,
FRP Cooling tower in Kuwait,
FRP Cooling tower in Zimbabwe,
FRP Cooling tower Malaysia,
Cooling tower manufacturer in Nigeria,
Cooling tower manufacturer in Tanzania,
Cooling tower manufacturer in Oman,
Cooling tower manufacturer in Togo,
Cooling tower manufacturer in Zambia,
Cooling tower manufacturer in Mozambique,
Cooling tower manufacturer in Uganda,
Cooling tower manufacturer in Myanmar,
Cooling tower manufacturer in Nigeria

50TR Cooling tower size: 960 x 2000MM (D x H) with 0.5HP, 960RPM Cooling tower Motor

Discription: MAKE:WELLTECH
Design,Engineering,Manufacturing,Supply, for MODEL WB-CZ152 -C1 FRP Cooling tower Round type with honey comb PVC fills, Water distribution arrangement with Aluminium sprinkler, Statically and dynamically balanced axial flow fan, TEFC motor, Make up and quick fill arrangement, over flow and drain connections with water holding basin. Suitable for flow rate 150L/min, 45000KCAL/H

Data For Optimal Selection
Rate of Water Circulation (LPM)
Water Inlet Temperature (ºC)
Water Outlet Temperature (ºC)
Ambient wet Bulb temperature (ºC)
Also Information in brief site conditions and Water Quality

The FRP Bottle Shape and Square shape Cooling Towers (Fiber glass Reinforced Plastic) also called as induced draft cooling tower. The casing and basins are designed to withstand severe vibration, high wind load and to resist corrosion. The Cooling Tower consists of Honey comb PVC fills and eliminators in a design that maximizes economy and efficiency and directly driven fan and Motor ‘Minimum drift Losses’. Uniform distribution of hot water by rotating arm sprinkler. Hot dipped Galvanized hardware to withstand wind forces. The bottle shape makes possible to provide maximum cooling efficiency in minimum plan area with lower energy consumption.

100TR FRP Round shape Cooling tower with PVC Fills, Fan Motor manufacturer in Oman

00TR welltech brand cooling tower

We leading manufacturers and exports of 100TR FRP Round shape Cooling tower with PVC Fills, Fan Motor manufacturer in Nigeria to below countries
Cooling tower manufacturer and supplier of in Bangladesh,
FRP Cooling tower in Djibouti,
Fiber plastic Cooling tower in United Arab Emirates,
GRP Cooling tower in Kenya,
FRP Cooling tower in Kuwait,
FRP Cooling tower in Zimbabwe,
FRP Cooling tower Malaysia,
Cooling tower manufacturer in Nigeria,
Cooling tower manufacturer in Tanzania,
Cooling tower manufacturer in Oman,
Cooling tower manufacturer in Togo,
Cooling tower manufacturer in Zambia,
Cooling tower manufacturer in Mozambique,
Cooling tower manufacturer in Uganda,
Cooling tower manufacturer in Myanmar,
Cooling tower manufacturer in Nigeria

50TR Cooling tower size: 2895 x 3050MM (D x H) with 5HP, 960RPM Cooling tower Motor

Discription: MAKE:WELLTECH
Design,Engineering,Manufacturing,Supply, for MODEL WB-CZ100 -C1 FRP Cooling tower Round type with honey comb PVC fills, Water distribution arrangement with Aluminium sprinkler, Statically and dynamically balanced axial flow fan, TEFC motor, Make up and quick fill arrangement, over flow and drain connections with water holding basin. Suitable for flow rate 1000L/min, 300000KCAL/H

Data For Optimal Selection
Rate of Water Circulation (LPM)
Water Inlet Temperature (ºC)
Water Outlet Temperature (ºC)
Ambient wet Bulb temperature (ºC)
Also Information in brief site conditions and Water Quality

The FRP Bottle Shape and Square shape Cooling Towers (Fiber glass Reinforced Plastic) also called as induced draft cooling tower. The casing and basins are designed to withstand severe vibration, high wind load and to resist corrosion. The Cooling Tower consists of Honey comb PVC fills and eliminators in a design that maximizes economy and efficiency and directly driven fan and Motor ‘Minimum drift Losses’. Uniform distribution of hot water by rotating arm sprinkler. Hot dipped Galvanized hardware to withstand wind forces. The bottle shape makes possible to provide maximum cooling efficiency in minimum plan area with lower energy consumption.

2TR Air cooled chiller manufacturer Ernakulam Kerala,

2TR industrial Air Cooled chiller

We are manufacturing Industrial Refrigeration Chillers are specially designed to 2TR Air cooled chiller manufacturer Ernakulam Kerala,
Automatic Grade Automatic, Semi-Automatic
Capacity 1TR – 60TR
Phase Single Phase, Three Phase
Size Small, Medium, Large
Temperature 30deg c – 5 deg c

Our rich industry experience in this field enabled us to provide a wide range of Water Cooled Chiller to our reputed clients. These products come with optimum quality insulated plate heat exchanger and tanks glass. These products are quality tested to ensure their quality and optimum performance. We are offering these products at pocket-friendly prices.
Description
Airtech Chilling Plant is being manufactured from 3 TR to 250 TR capacity, In compact design covering minimum floor area.

Our Chilling plants have different features details as below:

Compressor
We are using Reciprocating / Scroll/ Semi Hermetic compressor of reputed make.

Condenser
Compact design shell and tube type / Fins & Tube type. It is being tested hydraulically at 20 Kg/cm²

Chiller
Condensed liquid refrigerant is being expanded in DX Type Chiller through expansion valve. Water is being circulated through Chiller shell side having baffles arrangement, chiller is also being manufactured and tested hydrostatically at 20 Kg/cm² pressure.

Controls
Low Pressure, High Pressure cutout, oil pressure control are is provided for the safety of plant. PLC / Thermostat is also provided for automatic tripping when temperature is achieved.

80TR FRP Round shape Cooling tower with PVC Fills, Fan Motor manufacturer in Tanzania

80tr FRP Rectangular shape cooling tower

We leading manufacturers and exports of 80TR FRP Round shape Cooling tower with PVC Fills, Fan Motor manufacturer in Nigeria to below countries
Cooling tower manufacturer and supplier of in Bangladesh,
FRP Cooling tower in Djibouti,
Fiber plastic Cooling tower in United Arab Emirates,
GRP Cooling tower in Kenya,
FRP Cooling tower in Kuwait,
FRP Cooling tower in Zimbabwe,
FRP Cooling tower Malaysia,
Cooling tower manufacturer in Nigeria,
Cooling tower manufacturer in Tanzania,
Cooling tower manufacturer in Oman,
Cooling tower manufacturer in Togo,
Cooling tower manufacturer in Zambia,
Cooling tower manufacturer in Mozambique,
Cooling tower manufacturer in Uganda,
Cooling tower manufacturer in Myanmar,
Cooling tower manufacturer in Nigeria

50TR Cooling tower size: 1920 x 2720MM (D x H) with 2HP, 960RPM Cooling tower Motor

Discription: MAKE:WELLTECH
Design,Engineering,Manufacturing,Supply, for MODEL WCS-CO230 FRP Cooling tower Round type with honey comb PVC fills, Water distribution arrangement with Aluminium sprinkler, Statically and dynamically balanced axial flow fan, TEFC motor, Make up and quick fill arrangement, over flow and drain connections with water holding basin. Suitable for flow rate 600L/min, 180000KCAL/H

Data For Optimal Selection
Rate of Water Circulation (LPM)
Water Inlet Temperature (ºC)
Water Outlet Temperature (ºC)
Ambient wet Bulb temperature (ºC)
Also Information in brief site conditions and Water Quality

The FRP Bottle Shape and Square shape Cooling Towers (Fiber glass Reinforced Plastic) also called as induced draft cooling tower. The casing and basins are designed to withstand severe vibration, high wind load and to resist corrosion. The Cooling Tower consists of Honey comb PVC fills and eliminators in a design that maximizes economy and efficiency and directly driven fan and Motor ‘Minimum drift Losses’. Uniform distribution of hot water by rotating arm sprinkler. Hot dipped Galvanized hardware to withstand wind forces. The bottle shape makes possible to provide maximum cooling efficiency in minimum plan area with lower energy consumption.

60TR FRP Round shape Cooling tower with PVC Fills, Fan Motor manufacturer in Nigeria

50Tr Cooling tower welltech

We leading manufacturers and exports of 60TR FRP Round shape Cooling tower with PVC Fills, Fan Motor manufacturer in Nigeria to below countries
Cooling tower manufacturer and supplier of in Bangladesh,
FRP Cooling tower in Djibouti,
Fiber plastic Cooling tower in United Arab Emirates,
GRP Cooling tower in Kenya,
FRP Cooling tower in Kuwait,
FRP Cooling tower in Zimbabwe,
FRP Cooling tower Malaysia,
Cooling tower manufacturer in Nigeria,
Cooling tower manufacturer in Tanzania,
Cooling tower manufacturer in Oman,
Cooling tower manufacturer in Togo,
Cooling tower manufacturer in Zambia,
Cooling tower manufacturer in Mozambique,
Cooling tower manufacturer in Uganda,
Cooling tower manufacturer in Myanmar,
Cooling tower manufacturer in Nigeria

50TR Cooling tower size: 1920 x 2720MM (D x H) with 2HP, 960RPM Cooling tower Motor

Discription: MAKE:WELLTECH
Design,Engineering,Manufacturing,Supply, for MODEL WCS-CO230 FRP Cooling tower Round type with honey comb PVC fills, Water distribution arrangement with Aluminium sprinkler, Statically and dynamically balanced axial flow fan, TEFC motor, Make up and quick fill arrangement, over flow and drain connections with water holding basin. Suitable for flow rate 600L/min, 180000KCAL/H

Data For Optimal Selection
Rate of Water Circulation (LPM)
Water Inlet Temperature (ºC)
Water Outlet Temperature (ºC)
Ambient wet Bulb temperature (ºC)
Also Information in brief site conditions and Water Quality

The FRP Bottle Shape and Square shape Cooling Towers (Fiber glass Reinforced Plastic) also called as induced draft cooling tower. The casing and basins are designed to withstand severe vibration, high wind load and to resist corrosion. The Cooling Tower consists of Honey comb PVC fills and eliminators in a design that maximizes economy and efficiency and directly driven fan and Motor ‘Minimum drift Losses’. Uniform distribution of hot water by rotating arm sprinkler. Hot dipped Galvanized hardware to withstand wind forces. The bottle shape makes possible to provide maximum cooling efficiency in minimum plan area with lower energy consumption.

50TR FRP Round shape Cooling tower in Oman, Muscat, UAE

50TR Round shape cooling tower

We leading manufacturers and exports of 50TR FRP Round shape Cooling tower for Ice Cream Making Unit with PVC Fills to below countries
Cooling tower manufacturer and supplier of in Bangladesh,
FRP Cooling tower in Djibouti,
Fiber plastic Cooling tower in United Arab Emirates,
GRP Cooling tower in Kenya,
FRP Cooling tower in Kuwait,
FRP Cooling tower in Zimbabwe,
FRP Cooling tower Malaysia,
Cooling tower manufacturer in Nigeria,
Cooling tower manufacturer in Tanzania,
Cooling tower manufacturer in Oman,
Cooling tower manufacturer in Togo,
Cooling tower manufacturer in Zambia,
Cooling tower manufacturer in Mozambique,
Cooling tower manufacturer in Uganda,
Cooling tower manufacturer in Myanmar,
Cooling tower manufacturer in Nigeria

50TR Cooling tower size: 1990 x 2100MM (D x H) with 2HP, 960RPM Cooling tower Motor

Discription: MAKE:WELLTECH
Design,Engineering,Manufacturing,Supply, for MODEL WCS-CO230 FRP Cooling tower Round type with honey comb PVC fills, Water distribution arrangement with Aluminium sprinkler, Statically and dynamically balanced axial flow fan, TEFC motor, Make up and quick fill arrangement, over flow and drain connections with water holding basin. Suitable for flow rate 300L/min, 90,000KCAL/H

Data For Optimal Selection
Rate of Water Circulation (LPM)
Water Inlet Temperature (ºC)
Water Outlet Temperature (ºC)
Ambient wet Bulb temperature (ºC)
Also Information in brief site conditions and Water Quality

The FRP Bottle Shape and Square shape Cooling Towers (Fiber glass Reinforced Plastic) also called as induced draft cooling tower. The casing and basins are designed to withstand severe vibration, high wind load and to resist corrosion. The Cooling Tower consists of Honey comb PVC fills and eliminators in a design that maximizes economy and efficiency and directly driven fan and Motor ‘Minimum drift Losses’. Uniform distribution of hot water by rotating arm sprinkler. Hot dipped Galvanized hardware to withstand wind forces. The bottle shape makes possible to provide maximum cooling efficiency in minimum plan area with lower energy consumption.

40TR FRP Cooling tower for Milk powder making plant in Theni,Tamil nadu

40tr cooling tower dubai

We leading manufacturers and exports of 40TR FRP Round shape Cooling tower for Ice Cream Making Unit with PVC Fills to below countries
Cooling tower manufacturer and supplier of in Bangladesh,
FRP Cooling tower in Djibouti,
Fiber plastic Cooling tower in United Arab Emirates,
GRP Cooling tower in Kenya,
FRP Cooling tower in Kuwait,
FRP Cooling tower in Zimbabwe,
FRP Cooling tower Malaysia,
Cooling tower manufacturer in Nigeria,
Cooling tower manufacturer in Tanzania,
Cooling tower manufacturer in Oman,
Cooling tower manufacturer in Togo,
Cooling tower manufacturer in Zambia,
Cooling tower manufacturer in Mozambique,
Cooling tower manufacturer in Uganda,
Cooling tower manufacturer in Myanmar,
Cooling tower manufacturer in Nigeria

40TR Cooling tower size: 1780 x 1950MM (D x H) with 1HP Motor

Discription: MAKE:WELLTECH
Design,Engineering,Manufacturing,Supply, for MODEL WCS-CO230 FRP Cooling tower Round type with honey comb PVC fills, Water distribution arrangement with Aluminium sprinkler, Statically and dynamically balanced axial flow fan, TEFC motor, Make up and quick fill arrangement, over flow and drain connections with water holding basin. Suitable for flow rate 300L/min, 90,000KCAL/H

Data For Optimal Selection
Rate of Water Circulation (LPM)
Water Inlet Temperature (ºC)
Water Outlet Temperature (ºC)
Ambient wet Bulb temperature (ºC)
Also Information in brief site conditions and Water Quality

The FRP Bottle Shape and Square shape Cooling Towers (Fiber glass Reinforced Plastic) also called as induced draft cooling tower. The casing and basins are designed to withstand severe vibration, high wind load and to resist corrosion. The Cooling Tower consists of Honey comb PVC fills and eliminators in a design that maximizes economy and efficiency and directly driven fan and Motor ‘Minimum drift Losses’. Uniform distribution of hot water by rotating arm sprinkler. Hot dipped Galvanized hardware to withstand wind forces. The bottle shape makes possible to provide maximum cooling efficiency in minimum plan area with lower energy consumption.

30TR FRP Round shape Cooling tower for Ice Cream Making Unit with PVC Fills

30TR Cooling tower FRP Cooling tower exporter

We leading manufacturers and exports of 30TR FRP Round shape Cooling tower for Ice Cream Making Unit with PVC Fills to below countries
Cooling tower manufacturer and supplier of in Bangladesh,
FRP Cooling tower in Djibouti,
Fiber plastic Cooling tower in United Arab Emirates,
GRP Cooling tower in Kenya,
FRP Cooling tower in Kuwait,
FRP Cooling tower in Zimbabwe,
FRP Cooling tower Malaysia,
Cooling tower manufacturer in Nigeria,
Cooling tower manufacturer in Tanzania,
Cooling tower manufacturer in Oman,
Cooling tower manufacturer in Togo,
Cooling tower manufacturer in Zambia,
Cooling tower manufacturer in Mozambique,
Cooling tower manufacturer in Uganda,
Cooling tower manufacturer in Myanmar,
Cooling tower manufacturer in Nigeria

30TR Cooling tower size: 1660 x 2000MM (D x H) with 1HP Motor

Discription: MAKE:WELLTECH
Design,Engineering,Manufacturing,Supply, for MODEL WCS-CO230 FRP Cooling tower Round type with honey comb PVC fills, Water distribution arrangement with Aluminium sprinkler, Statically and dynamically balanced axial flow fan, TEFC motor, Make up and quick fill arrangement, over flow and drain connections with water holding basin. Suitable for flow rate 300L/min, 90,000KCAL/H

Data For Optimal Selection
Rate of Water Circulation (LPM)
Water Inlet Temperature (ºC)
Water Outlet Temperature (ºC)
Ambient wet Bulb temperature (ºC)
Also Information in brief site conditions and Water Quality

The FRP Bottle Shape and Square shape Cooling Towers (Fiber glass Reinforced Plastic) also called as induced draft cooling tower. The casing and basins are designed to withstand severe vibration, high wind load and to resist corrosion. The Cooling Tower consists of Honey comb PVC fills and eliminators in a design that maximizes economy and efficiency and directly driven fan and Motor ‘Minimum drift Losses’. Uniform distribution of hot water by rotating arm sprinkler. Hot dipped Galvanized hardware to withstand wind forces. The bottle shape makes possible to provide maximum cooling efficiency in minimum plan area with lower energy consumption.